What does the printer output from the HI 3030 look like?

This is what the output from the serial port in printer mode would be with only one load cell hooked up in channel two.

NOTE: Rate Of Change (ROC) will only be present if enabled in the unit.

Hardy 3030<CR><LF>
19 Apr 2005 09:06<CR><LF>
OPER. ID: <CR><LF>
Channel #1 <CR><LF>
-- ADC ERROR -- <CR><LF>
<CR><LF>
<CR><LF>
Channel #2 <CR><LF>
NET 0.02 lb<CR><LF>
GROSS 0.02 lb<CR><LF>
TARE 0.00 lb<CR><LF>
ROC 0.00 lb/s<CR><LF>
<CR><LF>
Channel #3 <CR><LF>
-- CHAN OFF -- <CR><LF>
<CR><LF>
<CR><LF>
Channel #4 <CR><LF>
-- CHAN OFF -- <CR><LF>
<CR><LF>
<CR><LF>

Here is the same unit with load cell in channel one.

Hardy 3030<CR><LF>
19 Apr 2005 09:06<CR><LF>
OPER. ID: <CR><LF>
Channel #1 <CR><LF>
NET 0.02 lb<CR><LF>
GROSS 0.02 lb<CR><LF>
TARE 0.00 lb<CR><LF>
ROC 0.00 lb/s<CR><LF>
<CR><LF>
Channel #2 <CR><LF>
-- ADC ERROR -- <CR><LF>
<CR><LF>
<CR><LF>
Channel #3 <CR><LF>
-- CHAN OFF -- <CR><LF>
<CR><LF>
<CR><LF>
Channel #4 <CR><LF>
-- CHAN OFF -- <CR><LF>
<CR><LF>
<CR><LF>