This Product is Obsolete.
This page provides users with documentation and drawings. The Product Migration Path is the HI2151/30WC or the HI6200-ANA Analog Weight Transmitter.
The HI 2110WI is a compact, multi-purpose weight indicator, used for a wide variety of process weighing applications including batching, blending, filling/dispensing, force measurement, level by weight, and weight rate monitoring.
The HI 2110WI can transmit data over a variety of Allen-Bradley Remote I/O, Profibus, Analog, or BCD communications. Data is displayed on the six-digit fourteen-segment LED display.
Weight values can be based on either Net, Gross, weight values in pounds, or kilograms. The 20-bit analog to digital converter in the weight indicator updates 20 times per second and is capable of 985,000 counts of display resolution.
This gives the instrument the ability to tolerate large “dead” loads, oversizing of load cells/sensors, and still have sufficient resolution to provide accurate weight measurement. Commands can be entered into the instrument from the communication port or locally from a tactile feel sixteen button front panel keypad.
A portion of the keys can be locked out to limit operator access and protect data. A limited number of commands can be entered through a rear Remote Functions connector.
The instrument is available in a one-piece (HI 2110WI) or two-piece (HI 2110WI-RM) panel mount configuration. Contact us today to integrate weighing into your application!
Alpha-Numeric Display
- 6 digit. 14-segment red LED
Update Rate
- 20 times per second
Averaging
- Sliding up to 200 readings in single unit increments
Resolution
- Display: 1:985,000 (3mV/V load cells)
- Internal: 1:1,048,000
Accuracy
- 0.0015% non-linearity
Common Mode Rejection
- 100dB at 50-60Hz
Standard Networking Choices
- Remote I/O (-RIO)
- Profibus (-PB)
- Analog; current and voltage (-AN)
- BCD; includes 60” cable (-BCD)
Stable Weight Reading
- WAVERSAVER® 0.25Hz minimum
Calibration Techniques
- C2® Second Generation electronic calibration
- Traditional calibration with test weights
Data Security
- Secure Memory Module
Excitation
- 5VDC internal power supply drives up to four 350-ohm load cells
Power
- 120/240VAC ±10%, 47/63Hz
- 10 watts with options installed
- (-240) configured for 240VAC
Operating Temperature
- -10° to +50°C (14° to 122°F)
Humidity
- 0-90% non-condensing
Inputs
- 4 remote functions (optional mating connector)
Warranty
- Two-year warranty against defects in workmanship
All specifications are subject to change without notice. Please contact the Hardy factory or visit our website for the latest specifications.
The Hardy Process Toolbox is a set of productivity tools that support industrial weighing functions. Each tool saves time, increases accuracy, improves efficiency, or reduces risk in process weighing applications, including WAVERSAVER® to eliminate vibration, C2® electronic calibration, and Integrated Technician® to name just a few.
The HI 2110 features the following Toolbox technologies:
WAVERSAVER® Vibration Eliminator
Hardy's WAVERSAVER core technology eliminates the effects that surrounding vibration has on the scale weight signal, providing only true data for fast, accurate weight reading.
C2® (or eCAL) Electronic Calibration
The Hardy C2® (or eCAL as it is known in China) core feature provides quick and easy electronic calibration of a weighing system without the need for heavy test weights.
Secure Memory Module Stores Configuration Data
Hardy's Secure Memory Module (SMM) uses a standard SD card to automatically back up critical weighing system data, allowing you to transfer it to another like controller in a few minutes.