Hardy’s single (HI 1756-WS) and dual (HI-1756-2WS) are weigh scale modules that mount directly into an Allen-Bradley ControlLogix® PLC Chassis. They read weight and diagnostic data from one set or two separate sets of strain gauge load sensors or load cells and communicate this data over the I/O chassis backplane to the ControlLogix Processor.
The HI 1756-nDF ControlLogix Dispenser/Filler module is the easy answer to a variety of material feed applications, especially, when speed and accuracy of the feed are paramount to the process. The module batches, fills, or dispenses aggregates, granulates, liquids, or gases, handling the entire feed process.
Hardy HI 1769-WS and -2WS are single channel PLC-style weigh scale modules for use with the Allen-Bradley MicroLogix® 1500 and CompactLogix® controllers. The HI 1769-WS and -2WS reads and conditions weight and diagnostic data from strain gauge load sensors or load cells up to one hundred times per second and communicates this data over the I/O chassis backplane to the PLC processor.
Hardy Process Solutions EASY 8™ Weigh Scale Module (HI 2080WS) is for the Allen-Bradley® Micro800™ programmable controller. This low-cost solution is designed to provide “just enough“ functionality that strikes a balance between price, quality of weight reading, and Hardy’s reputation for high-quality process measurement products.
The HI 3010 is a self-contained application-specific process weighing controller that can act as a stand-alone controller, or as a sub routine in your PLC/PAC, PC, or DCS ladder logic system over its extensive networking capabilities
NOT RECOMMENDED FOR NEW INSTALLATIONS.
The HI 3030 is a flexible weight controller that can monitor and control up to four scales simultaneously. It can act as a front end to a PLC/PAC, PC, or DCS system or operate as a stand-alone instrument for simple control or weight monitoring. Common applications for the HI 3030 include leveling, batching, filling, dispensing, and check weighing. You can easily configure or monitor the HI 3030 operations using the front panel, a web browser, or network interface.
NOT RECOMMENDED FOR NEW INSTALLATIONS.
The HI 3030 is a flexible weight controller that can monitor and control up to four scales simultaneously. It can act as a front end to a PLC/PAC, PC, or DCS system or operate as a stand-alone instrument for simple control or weight monitoring. Common applications for the HI 3030 include leveling, batching, filling, dispensing, and check weighing. You can easily configure or monitor the HI 3030 operations using the front panel, a web browser, or network interface.
The HI 4050+ is a fast, high-resolution weight controller that helps to reduce your labor content, speed your production throughput, and improve the quality and safety of your end product. The HI 4050+ acts as a front end weight controller to a PLC, PC, or DCS system. It also operates as a standalone weight controller or monitor.
The new Hardy HI 6020 Summing box is a critical component in a weighing system that enables the use of Hardy’s core technologies - C2® electronic calibration and Integrated Technician® (IT).
The HI 6500 series are EtherNet/IP® enabled weight processors with a Rockwell Add-On-Profile (AOP) and Faceplate/AOIs. They have a big, bright multi-channel display and deliver fast, high-resolution weight readings. They also feature, Modbus, Analog, and Ethernet communication options. They are also available in Swivel Mount and Panel Mount Wall System configurations.
The HI6600 series is a modular system of weight processors that deliver up to 30 channels of fast, stable, high-resolution weight readings to PLCs, PACs, and DSCs over a single fieldbus network connection.
NOTE: To configure a HI6600 to add to a quote, under Communications select either EtherNet/IP or ProfiBus. To select HI6610s to add to a Quote, select HardyNet.
The HI6800 series instruments are weight controllers ideal for a wide variety of weight-based applications. The new HI6850 features a dual-core processor and combines direct process control with fast, accurate and stable weight data essential to profitable manufacturing operations.
